Squadron 43 Electrics

The place for Fairline discussions!
Post Reply
Posts: 1
Joined: Mon Jul 25, 2016 2:30 pm

Squadron 43 Electrics

Post by Hydra » Tue Aug 09, 2016 1:58 pm

Hi All, We have just purchased a 97 Squadron 43. We are going to update the VHF to a dual station Icom and I'm interested to know how to get to the lower helm starboard side controlls and rear of the breaker pannel. My guess is that the helm seat has to come off and the wooden pannel under it, is that correct?



Posts: 18
Joined: Sun Aug 07, 2016 8:50 am

Re: Squadron 43 Electrics

Post by Wiggley » Fri Aug 12, 2016 3:14 pm

Have you tried removing the ceiling panel directly beneath the lower helm position in the STB guest cabin.
Craig Belding LYR

dickythe diver
Posts: 19
Joined: Sun Oct 04, 2015 5:56 pm

Re: Squadron 43 Electrics

Post by dickythe diver » Sat Sep 24, 2016 2:51 pm

I have done exactly this job. A real nightmare of a job. You have to follow the upper helm to lower helm on the starboard side. This is where all the electrics go. I have a Phantom 43. There was a pull through left by the factory but it is a real tight fit, mine got stuck half way. If you need any further help pm me. Regards Richard.

Post Reply